RIDGID® SeeSnake® Standard with TruSense™ SL w/200' Standard 35mm
63603
The Standard reel is ideal for inspecting 50 to 300 mm [2 to 12 in] lines and comes with either a 61 m [200 ft] or 99 m [325 ft] push cable. Both cables are reinforced with fiberglass and flexible enough to travel through sharp 90° bends, yet stiff enough to push the camera head long distances. A self-leveling camera head is also available to keep the image upright.
TruSense™ technology establishes a two-way communication link between the camera head and a connected SeeSnake CS65x, CS6x, CS6xPak, or CS12x monitor. With TruSense, advanced sensors on the camera head are able to convey valuable information about the in-pipe environment.
Included with the SeeSnake Standard:
TiltSense™ on-camera inclinometer – provides the camera’s degree of tilt and displays it on the monitor
High dynamic range image sensor – expands the camera’s dynamic range, reducing blown-out areas and sections of the pipe that are too dark to see, offering superior clarity and detail
63603
The Standard reel is ideal for inspecting 50 to 300 mm [2 to 12 in] lines and comes with either a 61 m [200 ft] or 99 m [325 ft] push cable. Both cables are reinforced with fiberglass and flexible enough to travel through sharp 90° bends, yet stiff enough to push the camera head long distances. A self-leveling camera head is also available to keep the image upright.
TruSense™ technology establishes a two-way communication link between the camera head and a connected SeeSnake CS65x, CS6x, CS6xPak, or CS12x monitor. With TruSense, advanced sensors on the camera head are able to convey valuable information about the in-pipe environment.
Included with the SeeSnake Standard:
TiltSense™ on-camera inclinometer – provides the camera’s degree of tilt and displays it on the monitor
High dynamic range image sensor – expands the camera’s dynamic range, reducing blown-out areas and sections of the pipe that are too dark to see, offering superior clarity and detail
63603
The Standard reel is ideal for inspecting 50 to 300 mm [2 to 12 in] lines and comes with either a 61 m [200 ft] or 99 m [325 ft] push cable. Both cables are reinforced with fiberglass and flexible enough to travel through sharp 90° bends, yet stiff enough to push the camera head long distances. A self-leveling camera head is also available to keep the image upright.
TruSense™ technology establishes a two-way communication link between the camera head and a connected SeeSnake CS65x, CS6x, CS6xPak, or CS12x monitor. With TruSense, advanced sensors on the camera head are able to convey valuable information about the in-pipe environment.
Included with the SeeSnake Standard:
TiltSense™ on-camera inclinometer – provides the camera’s degree of tilt and displays it on the monitor
High dynamic range image sensor – expands the camera’s dynamic range, reducing blown-out areas and sections of the pipe that are too dark to see, offering superior clarity and detail